Z31 Turbo Intercooler Guide
The US-market Z31 Turbo's VG30ET came from the factory without an intercooler: the turbo blows straight through the intake pipe into the throttle body. That's fine at stock boost, but compressed air gets hot, and hot air is less dense and more likely to cause detonation. If you want more boost, an intercooler is one of the first things to add.
The only Z31 that got a factory intercooler was the Japanese-market 200ZR, whose RB20DET used a top-mount intercooler fed by a hood scoop. See model differences for more on that car.
What an Intercooler Does
- Cooler, denser air. More air in the same volume means more power at the same boost.
- Less detonation. Cooler intake air lowers the risk of pinging, which is what usually limits boost on a stock engine.
- Room for more boost. Our turbo swap guide recommends staying at the stock wastegate boost (about 8 psi) on a stock T3 without an intercooler, and up to about 15 psi with one, along with the fuel and tuning to match.
Intercooler Kits for the Z31
HKS kit
HKS sold an intercooler kit for the Z31 Turbo, with piping that runs across the engine bay to the throttle body. It's long out of production, but kits and parts still turn up used. We have the HKS kit's install instructions on our other guides page.
A VG30ET with the HKS intercooler piping running across to the throttle body.
Spearco kit
Spearco also made a Z31 intercooler kit in the 1980s. Its piping was routed so the car kept its air conditioning. Like the HKS kit, it's only available used now.
Modern bolt-on front-mount kits
Several companies sell complete kits for the VG30ET, usually an intercooler core, aluminum piping, a blow-off valve and often an aluminum radiator. Check how the core is mounted before you buy.
Avoid the CXRacing V-mount kit
The better route: a true front mount
A universal front-mount core placed upright behind the bumper opening, where air hits it directly, with custom piping to the turbo and throttle body. It's also the route to take if you want to keep the A/C. It needs fabrication, or a good exhaust or fabrication shop.
Things to Plan For
- Piping route and the A/C. The A/C compressor and the battery take up the space a front-mount pipe wants. Decide early whether the A/C stays.
- Blow-off valve. The Z31's airflow meter is before the turbo, so the ECU has already counted the air in the intake. A blow-off valve that vents to the atmosphere dumps that measured air, and the engine runs rich and can stumble between shifts. Use a recirculating (bypass) valve that returns the air to the intake after the airflow meter.
- Boost leaks. More pipe means more couplers and clamps. Use good silicone couplers and T-bolt clamps, and pressure test the system after the install.
- Radiator airflow. The core sits in front of the radiator. Watch coolant temperatures, especially in traffic and with the A/C on.
- Turbo inlet. The stock inlet pipe on the other side of the turbo is restrictive too. Our pass-through motor mount lets you run a larger inlet pipe through the mount.
Sources
- HKS intercooler kit instructions, provided by Mike Kwon
- Spearco Z31 intercooler kit instructions